Jobs/Vacancies

SPIE Oil & Gas Services openings

Published

5 months ago

November 26, 2024

admin

SPIE Oil & Gas Services (part of the SPIE Group) provides a complete range of services to some of the world’s largest oil and gas companies through its network of offices in 25 countries across Africa, the Middle-East and Asia-Pacific.

Our turnover has more than doubled in the last few years thanks to the dedication of our 4,000 employees to whom we give training, recognition, and genuine opportunities for career development. In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams.

We are recruiting to fill the position below:

Job Title: ICSS Supervisor

Location: Nigeria
Area activity: Mechanical, HVAC and Electrical Services
Contract type: International Contract

Mission

Assists the planning team by giving any technical support for the preparation of the jobs in his discipline.
Assists specialists working under Specific Maintenance Contracts (SMC),
Ensures that the COMPANY’s HSE regulations are respected (especially procedures related to work permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility,
Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field,
Monitors the functioning of utilities and equipment systems which are under his responsibility,
Performs the diagnostics and trouble shooting in the ICSS and PLC,
Follows-up the parameter values and alarms in the concerned systems, for condition monitoring purpose,
Carries out, at the CSR request, any intervention within his field of experience.

Methods:

Proposes any relevant action to improve performance and availability of control system.
Warns support teams of any recurring problems related to the availability or quality of spare parts,
Guaranties that software produced for modification or corrective actions are in conformity with functional analysis,
Guaranties that control system documentation is up to date.

Quality Assurance:

Verifies the quality of his planning by frequent checks of supervisor reports in CMMS.

Profile

Chartered Engineer (A-levels + 5 years’ study) or Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent.
5 years’ experience in the field of control system and at least 3 years as control system specialist in petrochemical industry
Minimum level of experience required: 10 years or more
A knowledge of the principles related to the process and equipment of oil and gas treatment installations
Specific professional knowledge: CMMS
Ability to work in a large multinational team
Ability to work independently while maintaining good relations with colleagues and others
Physical ability to work on offshore installations in the climatic conditions of the site.
He must have a proven sense of responsibility and a talent for management.
He must be rigorous and methodical in his approach to operations.
He must show common sense and be able to anticipate and analyse.
A natural, flexible authority is essential.
Experience in Subsea control systems would be preferred
Detailed understanding of system architecture and networks
Experience in PLC, Allen Bradley, Siemens, ladder logic systems etc. plus related communication interfaces and Human Machine Interfaces (HMI) – and all Machine Monitoring Systems (Bentley Nevada) including GE System 1.
Experience in fire and gas monitoring systems.

Required authorisations:

BOSIET
OSP
Security Background Check
Malaria Awareness
Offshore experience in Oil & Gas industry.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: System Engineer

Reference ID: 2024-36523
Location: Nigeria
Contract type: International

What’s the Role?

As a System Engineer, you’ll be at the heart of this critical project, ensuring seamless integration, validation, and implementation of the ICSS (Integrated Control and Safety System).

Here’s what you’ll do
Engineering Development:

Ensure the ICSS vendor has access to all relevant and up-to-date documentation for system development.
Oversee the design and engineering process to guarantee alignment with project specifications.

Vendor Coordination:

Act as the primary interface with the ICSS vendor, managing all technical and operational interactions.
Monitor and ensure adherence to the delivery schedule, identifying and resolving potential roadblocks early.

Solution Validation:

Plan, oversee, and track all validation milestones, including document reviews, Factory Acceptance Tests (FAT), and Site Acceptance Tests (SAT).
Ensure the solution meets all functional, safety, and performance requirements.

Site Preparation:

Proactively plan and coordinate any necessary site shutdowns to implement the ICSS solution with minimal disruption.
Prepare the site for a seamless transition to the new system.

Training:

Identify training needs within the project scope, working closely with the ICSS vendor.
Define, schedule, and oversee the delivery of all required training sessions to ensure teams are fully equipped to operate and maintain the system.

Continuous Improvement:

Analyze the project timeline to identify critical paths and potential risks.
Develop and implement mitigation strategies to prevent delays and optimize project execution.

Job Qualfications
Education:

Bachelor’s or Master’s degree in Automation, Industrial Electronics, or Industrial Computing.

Experience:

A minimum of 5 years in control systems engineering, preferably in FPSO or offshore environments.
Hands-on expertise with Schneider Foxboro DCS and Triconex SIS is essential.

Technical Skills:

Proficient in DCS and SIS programming (IEC 61131-3) is a plus.
Strong understanding of industrial communication protocols (Modbus,OPC, Ethernet).
Solid knowledge of safety standards and redundant systems in offshore settings.

Soft Skills:

Excellent problem-solving and analytical skills.
Organized and detail-oriented.
Strong communication skills, able to collaborate effectively in multicultural teams.
Willingness to travel and work offshore (BOSIET/OPITO certification is a plus).

Benefits
Choosing SPIE gives you the opportunity to:

Work for an international Group with operations on every continent,
Experience a wide variety of professions within several activities:
- Outdoor networks and street lighting
- Information and communication systems
- Nuclear power
- Maintenance
- Oil and gas
- HVAC engineering
- Electrical engineering
- Mechanical engineering
- Wind Energy.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Competent Person in Lifting Operation (CPLO)

Reference: 2024-36640
Location: Nigeria

Job Description

Ensuring at all time compliance with CR-EP-LSO-043 throughout COMPANY installations and sites, with reference to all handling and lifting operation and equipment.
Assisting Technical Authority in carrying out his role related to lifting and handling operations.
Give lifting advice to RSES when required
Supporting all sites with Technical Information relating to lifting within COMPANY installations and sites.
Providing technical expertise to Operations, Project, Well Engineering, and Business Development and has authority to provide solutions to technical challenge with regards to lifting operations.
Develop and maintain positive and productive relationships with departments.
Monitors and advises on all handling and lifting operations and provide assistance as required to COMPANY installations and sites.
Acts as handling and lifting authority on validation of contractor’s key deliverables and prescribed audits as necessary.
Review/audit annual scope of inspection and assessment of lifting and handling operations.
Provide technical input on contractor and consultant selection with lifting and handling content.
Participate in internal and external technical audits.
Represents COMPANY on industry committees and specialist forums involving legislative authorities and other oil and gas operators.
Promote best practice and use of innovative technology including maintenance of the CMS principles and the LMS.
Participates in incident investigation.
Initial contact when non-certified structural steel is required.
Assessing the personnel competencies to carry out lifting and handling operations.
Proposing individuals for SLS nomination.

Qualifications / Experience Required

Technical Engineer and / or Industrial related qualifications such as LEEA/ OPITO / CPA Technical Engineering or Science degree
10 years verifiable experience in lifting and handling industry at supervisory level
Broad and extensive knowledge in Lifting operations and equipment
Working to International standards
Experienced in Oil and Gas Industry
Worked in onshore, inshore and offshore operations
Risk assessment in relation to health, safety & environment
Lift classification and planning
Supervision of critical lifts
Assessment of personnel competence for lifting operations
Experience in training and coaching
Experience in Lifting and handling Audit
Possession of industry related qualification LEEA/ NSL / OPITO up to Level 3
Work to international standards such as BS, LOLER, ISO, API, etc.
Broad and extensive knowledge in handling and lifting appliances and operation
Good knowledge in lifting equipment inspection
Ability to prepare or review lifting engineering calculations and risk assessments.
Experience in training and coaching is preferred
Good communication skills in English.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Procurement Manager

Reference ID: 2024-36532
Location: Nigeria
Contract type: International

Your Mission

We are seeking a Procurement Manager to oversee the procurement activities for a major project in Lagos, Nigeria.
As a Procurement Manager, you’ll be a key player in ensuring the timely and cost-effective acquisition of goods and services necessary for the success of our project.
You’ll manage the end-to-end procurement process, ensuring compliance, quality, and efficiency.

Here’s what you’ll do
Procurement Strategy:

Develop and implement a comprehensive procurement plan aligned with project goals and timelines.
Identify cost-saving opportunities while maintaining quality and reliability.

Vendor Management:

Source, evaluate, and select reliable vendors and suppliers, focusing on quality, cost-efficiency, and delivery timelines.
Build and maintain strong relationships with key vendors, ensuring seamless collaboration throughout the project lifecycle.

Contract Management:

Negotiate contracts, ensuring favorable terms and conditions for the company.
Monitor and manage contract performance, addressing any deviations or disputes proactively.

Supply Chain Oversight:

Oversee the entire supply chain, ensuring the timely delivery of materials and equipment to the project site.
Anticipate potential bottlenecks and develop contingency plans to avoid delays.

Compliance and Risk Management:

Ensure procurement activities comply with company policies, legal requirements, and industry standards.
Identify risks within the procurement process and implement mitigation strategies to safeguard project timelines and budgets.

Continuous Improvement:

Analyze procurement processes to identify areas for improvement and implement best practices.
Use data-driven insights to optimize procurement performance and drive efficiency.

Job Profile
Education:

Bachelor’s or Master’s Degree in Supply Chain Management, Procurement, Business Administration, Engineering, or a related field.

Experience:

Minimum of 3 years in procurement of electrical and instrumentation equipment, preferably in the oil & gas, energy, or industrial sectors.
Proven track record of managing procurement for large-scale, complex projects, ideally in offshore or FPSO environments.

Benefits
Choosing SPIE gives you the opportunity to:

Work for an international Group with operations on every continent,
Experience a wide variety of professions within several activities:
- Outdoor networks and street lighting
- Information and communication systems
- Nuclear power
- Maintenance
- Oil and gas
- HVAC engineering
- Electrical engineering
- Mechanical engineering
- Wind Energy.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Project Manager / Project Director

Reference ID: 2024-36181
Location: Nigeria
Contract type: International

Why This Role?

Strategic Impact: Lead a project that drives progress in the energy sector, managing critical infrastructures and delivering value-added electrical and instrumentation systems.
Global Leadership: Manage a dynamic engineering team spread across multiple locations, enhancing your ability to coordinate international operations.
Challenge and Growth: Tackle the complexities of both onshore and offshore construction in a fast-paced, high-stakes environment.

Key Responsibilities
As Project Manager/Director, you will be responsible for:

Health & Safety: Prioritize the safety of all personnel, ensuring compliance with HSE goals and exceeding expectations where possible.
Operational Excellence: Guarantee adherence to SPIE’s stringent quality assurance processes, maintaining the highest standards across all project phases.
Team Leadership: Manage a skilled team of engineers and labor resources, ensuring optimal performance to meet project timelines and budgets.
Progress Oversight: Provide regular updates on progress, problem areas, and potential risks, ensuring transparency and timely decision-making.
Contract Management: Negotiate variations, claims, and ensure that contractual obligations are met, while proactively identifying cost-saving opportunities.
Risk Mitigation: Anticipate and mitigate project risks while uncovering new opportunities for success.

Job Profile

Previous experience working on a O&G / refinery / petrochemical site with a proven background of successful project delivery.
Extensive knowledge of related HSEQ safe working practices/procedures.
10 years of demonstrable experience in similar role or senior position in project management.
Strong skills in contract and claim management.
Excellent communication and negociation skills.
Extensive knowledge of construction process, it’s implementation and management.
Fully conversant with project management tools.
Ability to react to changing deadlines and achieve project goals / milestones.
Ability to manage / maintain budget / schedule requirements.

What You Bring:

Proven Expertise: Significant experience in the oil & gas, refinery, or petrochemical industry is essential.
Leadership Skills: A track record of managing multidisciplinary teams across different geographies.
Technical Acumen: Deep knowledge of EPC projects, particularly in the energy sector.
Resilience and Adaptability: Ability to thrive in challenging environments, particularly within Nigeria’s dynamic energy landscape.

What We Offer

The opportunity to work on a flagship project that will drive meaningful change in the energy industry.
A competitive compensation package.
The chance to grow within SPIE Global Services Energy, a leader in global energy solutions.
The Project Manager/Director will be based in Nigeria, Lagos.

Choosing SPIE gives you the opportunity to:

Work for an international Group with operations on every continent,
Experience a wide variety of professions within several activities:
- Outdoor networks and street lighting
- Information and communication systems
- Nuclear power
- Maintenance
- Oil and gas
- HVAC engineering
- Electrical engineering
- Mechanical engineering
- Wind Energy.